Common Stitching Problems With a Sewing Machine

Common Stitching Problems With a Sewing Machine

We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!

 

There are a lot of obstacles in sewing, one of them is the difficulty in searching for the right fabric so that you have a certain style in your mind, but you cannot find it in your favorite store, but this is not the only problem here.


Reverse sewing issues


You must remember that not all sewing machines are designed the same way and their reverse functions. Hence to find the lever or button that deals with the return function, you should refer to your owner's manual.


After finding its place on your sewing machine, check if the button is stuck or not. Usually this is the first thing that comes to your mind when you face the problem of reverse stitching.


The second thing that comes to my mind is that instead of the button you have a problem with the lever not working properly. You will need to cancel the lock lever to make sure it is still working properly.


If you have a computerized sewing machine, the on-board computer processor has broken and so you'll need a qualified repairer to fix it. Or your feeding teeth are disrupted and only go in the opposite direction.


For all these issues, it is best to take your device for inspection by a qualified repairer. This should be done when you are under warranty. Always remember that attempting to fix manually may void your warranty if you are not careful.


The zigzag stitch of the sewing machine does not work


Believe it or not, even if your sewing machine's zig-zag feature looks complicated, it might not be a complicated feature to fix and get back to work. When you switch to the zigzag feature, you may find that it only sews in a straight line.


One thing is for sure that when the zigzag is not working properly, you will not be able to do a lot of stitches. One of the simple solutions is to check if you have pressed the double needle switch by mistake.


This switch makes your sewing machine sew in a straight line only. Check that your machine is equipped with this switch and see if it is in the correct position for your zigzag function to work.


Also, you might have a dirty machine that is preventing your feature from performing its tasks. A final cause may be that you have not performed adequate maintenance on your machine. A lack of oil would interfere with the performance of your zig-zag function.


These are the most common reasons why your zig-zag function refuses to do its job. Before you go to a professional and pay a lot of money, read the next section first. Simple solutions can save you time and time.

Why are my stitches loose on my sewing machine?

Why are my stitches loose on my sewing machine?


There are many sources for this common problem. First, lint can prevent the feed dog from gripping your fabric. Since precision is required throughout the sewing process, a little lint can ruin that precision and spoil your sewing project.


Another source may be that you are using the wrong size needle. Or the needle is not compatible with the type of fabric you are trying to sew together. So the usual suspect called tension may be the culprit in this situation.


Check your voltage to make sure you have it right. Do a little test before you start sewing to double-check your settings and make sure everything is working properly. You should check the top and bottom tension of each thread you use to make sure you avoid any loose stitches.


Finally, the sewing speed will change your stitches and create loose stitches. If you're not careful, pull or push the fabric manually. You must resist the temptation to help the training dog do its job. Manual assistance ruins the need for precision sewing to function properly.


How to fix the stitch length on a sewing machine

How to fix the stitch length on a sewing machine


This problem depends on the type of sewing machine you have. The gear teeth wear out at the end which creates an issue as you cannot adjust stitch length.


Or the whole gear has fallen off making it very difficult to change your stitch length. When this happens, you shouldn't try to fix it yourself. Special tools and great expertise are required to perform the repair correctly.


Repair is also tricky, and parts may not be available to the regular handyman in your home. This applies to sewers which have a computerized sewing machine.


You may not have a broken gear, but the computer may not work properly and prevent you from changing the stitch length. When this happens, you need a sewing machine computer expert to handle the task.


Sewing can be fun, relaxing, and very frustrating. When your stitches are not working, your fun and relaxing hobby becomes very boring as well. Troubleshooting different issues helps you avoid annoying and frustrating emotions.


Most stitch problems are common and come with very common solutions. Look at the simple first before moving on to the complicated or more expensive fixes. If you still have your owner's manual, this book will lead you to these simple solutions and save you time and money.

Comments

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com.